Glowshift Air / Fuel Ratio Gauge Bedienungsanleitung PDF herunterladen

Elite 10 Color Narrowband Air Fuel Gauge

For Product Numbers: GS-ET02 & GS-EWT02

Wire Harness Color Code

Red:

12v Constant (un-switched) Source (+)

Black:

Vehicle / Engine Ground (-)

White:

12v Ignition (switched) Source (+)

Orange:

12v Dimmer (switched) Source (+) (optional)

1. Disconnect the negative battery cable.

2. Air / Fuel Ratio: Connect the white wire to the vehicle

oxygen sensor signal, before the catalytic convertor. You may

connect this wire directly to the ECU harness or splice into the

signal wire leaving the sensor. This wire color can vary, be sure to

consult your vehicle’s owner’s manual. (0v ~ 1v Output -

NARROW BAND ONLY)

 Note: If your vehicle does not have a narrowband o2

sensor, you will have to purchase a single wire

narrowband o2 sensor to complete this installation.

3. Route the narrowband wire harness from the back of the

gauge (port D) through the firewall to the engine bay. Next,

couple and secure the sensor wire harness to the back of the

nitrous pressure sensor.

 Note: Be sure to use a grommet when routing wires

through the firewall to protect them from stripping and

damage.

4. Connect the white wire to a positive 12 volt ignition (switched)

source. It may be connected to the fuse panel, an accessory wire,

or any positive 12 volt source that turns on and off with the

ignition switch of the vehicle.

 Note: If wiring to an un-fused source, install a 3 amp

fuse inline within 20 inches of the sources connection.

You may obtain an optional “expandable circuit”

accessory. This component easily fits into your fuse

panel and provides an additional fused power wire for

accessories such as gauges. This is available at

GlowShift.com or a local auto parts store.

5. Connect the red wire to a positive 12 volt constant (un-switched)

source, either directly to the battery or to a fuse panel on the vehicle.

 Note: If wiring to an un-fused source, install a 3 amp fuse

inline within 20 inches of the sources connection. You may

obtain an optional “expandable circuit” accessory. This

component easily fits into your fuse panel and provides an

additional fused power wire for accessories such as gauges.

This is available at GlowShift.com or a local auto parts

store.

6. The Night Time Dimming feature decreases the brightness of the

gauge face by 30%. Connect the orange wire to the 12 volt positive

headlamp source. This allows the mode to be activated when the

headlights come on. This step is optional and will not affect

operation of the gauge if it is omitted.

 Note: Do not connect the orange wire to a dimmer

wheel. This will cause the gauge lighting to flicker.

7. Connect the black wire from the gauge, to any good (unpainted)

ground connection. You may also route a wire directly to the

negative side of the vehicle’s battery.

8. Reconnect the negative battery cable.

9. Daisy Chain Feature (Optional): If you are installing more

than one Elite 10 Color Gauge, you can use the daisy chain feature

to power up to 4 additional gauges. Simply plug the included daisy

chain wire into the gauge that is already powered (port B); then

plug the other end of the wire into the daisy chain port on the next

gauge.

1 2 3

Operating Instructions 2

Inhaltsverzeichnis

Seite 1

Elite 10 Color Narrowband Air Fuel Gauge For Product Numbers: GS-ET02 & GS-EWT02 Wire Harness Color Code Red: 12v Constant (un-switched) Sourc

Seite 2 - Operating Instructions

Operating Instructions 1. 10-Color Mode: 1. Press the COLOR button to cycle between the 10 different color options. 2. The sequence of display c

Seite 3

ONE YEAR NON-TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER GlowShift Gauges, LLC ("GlowShift") warrants to the original retail consumer

Weitere Dokumente für Zubehör fürs Wasser Glowshift Air / Fuel Ratio Gauge

Um das Dokument anzuzeigen Glowshift Air / Fuel Ratio Gauge Bedienungsanleitung

Glowshift Air / Fuel Ratio Gauge Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Glowshift Air / Fuel Ratio Gauge Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör fürs Wasser Glowshift Air / Fuel Ratio Gauge herunter. GlowShift Air / Fuel Ratio Gauge User Manual Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Zubehör fürs Wasser Glowshift Air / Fuel Ratio Gauge

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör fürs Wasser Glowshift Air / Fuel Ratio Gauge